Construction portal - Doors and gates.  Interior.  Sewerage.  Materials.  Furniture.  News

Glue polyvinyl chloride, plexiglass, polyurethane, as well as cork, ceramics, wood, rubber and metal surfaces"Moment crystal" will help. This glue is not suitable only for dishes and any products in contact with food, polyethylene, teflon and styrofoam.

Components and Specifications

Glue "Moment Crystal" consists of acelate, acetone, polyurethane as a base and stabilizing substances, thanks to these components, the product has water resistance and excellent performance. Does not contain toluene.

Properties:

  • the composition is transparent in liquid and solidified form;
  • resistant to atmospheric factors due to the polyurethane base;
  • the seam crystallizes during the hardening process, which ensures an increased degree of adhesion of the surfaces;
  • characterized by water resistance, which allows the use of a means for repairing shoes and rubber boats;
  • resistant to dilute alkalis and acids;
  • frost-resistant;
  • the formed seam tolerates temperatures from -40 to + 70 ° С;
  • the optimal temperature range for working with the agent is from +18 to +25 ° C, dry warm air accelerates the crystallization process, in the cold solvents evaporate more slowly, so polymerization is inhibited;
  • it is allowed to work with the material at a temperature not higher than +70 ° С.


The composition is combustible, therefore, work with it should be away from open flame. There must be good ventilation in the room, since inhalation of Moment Crystal glue vapors can cause hallucinations, dizziness, and in rare cases, provoke vomiting and nausea. If the substance gets into the eyes, you should immediately seek medical attention.

After thawing, the product restores its original consistency and properties, the manufacturer recommends storage in the temperature range from -20 to +30 ° C. The shelf life of the product is 24 months.


Advice! Safety will be ensured by a hermetically sealed tube; upon contact with air, the glue dries quickly, crystallizes and becomes unusable. It will not be possible to return it to its original state.

The product is packaged in tubes of 30 ml (in one corrugated box there are 35 tubes) or 125 ml, jars of 750 ml and in canisters of 10 liters.


Instructions for use

In the liquid and solidified state, Moment Crystal is transparent. Instructions for gluing materials:

  1. Clean and degrease the areas thoroughly before joining.
  2. Apply glue to both surfaces to be joined and leave in the open air for a quarter of an hour.
  3. A visible film should form on the surface of the adhesive layer, before connecting, touch it with your fingers - it should not stick to them and stretch. If the material is highly absorbent, then apply the composition again.
  4. Connect the sections by pressing them together as hard as possible in the first seven seconds. After that, their position cannot be corrected.
  5. Apply pressure from the center of the section to the edges to prevent air from trapping at the seam.
  6. The product can be used after 24 hours.


Approximate consumption when applied to both areas to be joined is from 250 to 350 g/m 2 .

Advice! According to reviews, "Moment Crystal" is practically indestructible, very durable and reliable, and the quality of the formed seam corresponds to that declared by the manufacturer.

When working, it is often necessary to remove squeezed out excesses or eliminate accidental stains. How to wipe the "Moment Crystal":

  • clean the tools from the remnants of the product immediately after use with gasoline;
  • the same solvent removes fresh stains of Moment Crystal;
  • dried glue from the fabric can only be removed by dry cleaning, from other materials - with gasoline.

Universal waterproof glue "Moment Crystal" has a lot of advantages over other means. Its shape is very comfortable, the consistency is optimal. Even when bonding delicate materials, they will not be damaged, and glue spots will not appear on the front side. Due to the excellent performance characteristics, this adhesive composition is indispensable in everyday life, it allows you to connect homogeneous and dissimilar materials.

Varieties of adhesives "Moment"

The line of polyurethane adhesives "Moment" is produced by the manufacturer Henkel. According to user reviews, the demand for this series is the highest among analogues. Available for sale the following types contact adhesives series:

  1. "Moment No. 1 Classic" (Universal). Glue is inexpensive, while suitable for most known materials. Is different high level adhesion, density, fast drying.
  2. Moment Gel. This tool has a gel structure, is a kind of superglue, is available not only in tubes, but also in canisters.
  3. "Crystal Moment". Absolutely transparent composition based on polyurethane, used in everyday life, repair, construction.
  4. "Moment Marathon". Most often purchased for shoe repair, widely used by craftsmen. Very resistant to factors environment.
  5. "Moment 88 Extra strong." This tool guarantees the highest bonding strength, is not afraid of water, frost.
  6. "Moment of 60 seconds". Single-component adhesive characterized by fast drying. It is convenient for application on the vertical bases.

Also on sale there are specialized tools "Moment" - for rubber, plastic, boats and PVC, cork. For any material, the universal glue "Moment Gold Standard" is suitable.

The composition of the glue "Moment Crystal"

"Moment" is made up of complex chemicals, many of which are inventions of the latest generations. The basis is heterochain polymers from the polyurethane group. The composition is also represented by the following substances:

  • ethyl ester of acetic acid;
  • acetone and other saturated ketones;
  • state stabilizers of other chemicals;
  • aliphatic, naphthenic hydrocarbons;
  • antioxidant;
  • synthetic resins;
  • ethyl acetate.

The presence of acetone and other solvents explains the pungent smell of Moment. Despite the harm of these components and the need to work in protective masks, the manufacturer positions the product as complying with international environmental norms and standards. The most harmful solvent, toluene, was removed from the formulation back in 1998, but fakes containing this substance are periodically found on the market.

Working properties and performance characteristics

The tool is used for gluing a huge number of materials, has a minimum of restrictions. Applying only one side of the part with a thin layer and joining the elements provide the highest strength of the adhesive seam. This is achieved due to the excellent level of adhesion. "Moment Crystal" is transparent, which only expands the scope of its operation, because after gluing the joint will be completely invisible.

Main specifications facilities:

  • the recommended temperature while working with glue is from +15 to +30 degrees (it is possible at a different temperature, although the polymerization time will change);
  • operating temperature of products after the adhesive joint has dried - from -35 to +75 degrees;
  • high cold resistance - the seam withstands several cycles of defrosting and freezing, the glue itself in the tube also quickly restores its original properties after defrosting;
  • consumption - 200-400 g / sq. m (depending on the type of surface, purpose);
  • moisture resistance, no changes in technical parameters even with direct exposure to water;
  • resistance to ultraviolet radiation, the influence of dilute acids, weak alkalis;
  • the optimal density of the glue is 0.88 g / cu. cm.

When using the "Moment" care must be taken, it is highly flammable due to the presence of solvents in the composition. If you do not follow the recommendations indicated by the manufacturer for operating temperatures, the quality and performance of the adhesive joint will change, it may be deformed.

Glue has several restrictions on use. It is forbidden to use it to repair things made of Teflon, polypropylene, polyethylene. Also, glue should not be used for gluing dishes, other kitchen items and utensils that may come into contact with food. For plastic, there is not a ban, but a restriction: it is important to drop a little "Moment" on an inconspicuous area, evaluate the reaction of the material within 30 minutes. If there is no yellowing, warping of the material, you can safely use glue for work.

Application area

The instruction says that the best adhesion rates are achieved when using glue on materials such as PVC (hard, soft), porcelain and ceramics, polystyrene and plexiglass, ordinary glass. Glue is also used for gluing leather products (natural, artificial), fabric and cork, cardboard and paper, foam rubber and rubber. No less high quality will be the place of gluing when applied to wood, metal. It is thanks to this variety of purposes that glue is considered universal.

You can use "Moment Crystal" for various household, repair, restoration work. Since it is moisture resistant, it is suitable for products in contact with water and other non-aggressive liquids. You can use the tool at home, in production, in the service sector.

Advantages and disadvantages

Glue is now in great demand on the market, because it has a lot of advantages and compares favorably with analogues. Its advantages:

  • low price, availability in almost all household, construction, department stores;
  • excellent seam strength associated with the crystallization of the composition as it dries;
  • the ability to use on parts subject to vibration, mechanical stress of moderate strength due to the elasticity of the adhesive;
  • transparency, which determines the suitability for the repair of souvenirs, ceramics, decor, household appliances;
  • the possibility of gluing dissimilar materials;
  • the absence of the most toxic solvent - toluene.

You can wipe off Moment in liquid form without the help of solvents: it simply rolls off the surface, which is another plus. The disadvantages include unsuitability for a number of materials, as well as the need to exclude contact with food. Another drawback is the unpleasant odor associated with the presence of acetone.

Release form and price

The cost of Moment Crystal glue is 96-120 rubles, depending on the store. The price is indicated for the minimum package - 30 ml. There are several types of adhesives with the same output volume:

  • tube 30 ml;
  • 30 ml in show box;
  • 30 ml on a blister card;

Also on sale is "Moment Crystal" in tubes of 125 ml in a show box, cans of glue with a volume of 750 ml are sold. In specialized, branded, construction stores, at the bases there are canisters of 10 liters of glue.

Instructions for use

All tips for working with glue are indicated on the package. To obtain a high-quality adhesive seam, the base must first be prepared - cleaned of dirt, treated with fine-grained sandpaper. To remove grease stains, oil film, both surfaces to be glued must be degreased. For this purpose, it is best to wipe them with alcohol, acetone, which will also help remove residues. coatings. You can also wash products with household detergents.

  • apply glue to one of the surfaces if they are homogeneous, and to both when dissimilar materials are glued together;
  • if the bases are porous, repeat the application of glue after a couple of minutes;
  • press the products against each other from the center to the edges in order to prevent air from accumulating, fix in any convenient way;
  • if possible, it is allowed to use a special roller for rolling parts;
  • withstand 10-20 minutes;
  • before full operation, leave the product for a day (to gain strength of the adhesive seam).

You can make adjustments to the position of the parts only immediately after they are applied to each other. Separation of objects with immediate re-gluing is allowed. After 5-7 minutes it will be impossible to do this, you will have to clean the bases from the glue and repeat all the manipulations. The manufacturer does not recommend gluing in rooms with high humidity. Despite the moisture resistance of the adhesive seam, at the time of connection, it is worth excluding the action of liquid in one form or another.

Sometimes it happens that glue gets on clothes, other objects, on hands. You can remove already dried glue with acetone, gasoline. It is better to dry-clean the fabric or try to wash it with powder, detergents, wipe it with alcohol. Glue is removed from tools with gasoline, in which they are soaked for 1-2 hours.

Precautionary measures

The glue is flammable, so when working with it, the following safety precautions should be observed:

  • do not open the package near any sources of fire;
  • do not apply glue to products located near sources of high temperature;
  • do not glue heated surfaces.

All actions with the "Moment" are carried out only in a ventilated room (exhaust hoods or through ventilation are used). When working for a long time, even with forced ventilation, you must wear a respirator! Work should be in overalls, gloves. If glue gets on hands, other open areas skin should be washed immediately with plenty of soap and water. If the agent enters the eyes, other mucous membranes, it is important to rinse them and immediately seek medical help.

Glue storage

Store the product only in its original packaging, tightly closed. The storage place should be located out of reach of children, animals, sunlight and with the exclusion of possible heating. It is desirable that the temperature is not lower than room temperature, but freezing of the glue is also allowed (after defrosting, it will retain its properties). Temperature standards for storage - from -20 to +30 degrees, term - up to 2 years.

It is forbidden to throw used Moment packaging into the fire! It is disposed of together with household waste. Subject to all recommendations, the adhesive does not pose a danger to human life and health.

Goods ordered in the OBI online store are delivered in Moscow and the Moscow Region within 50 km from the Moscow Ring Road. Shipping costs are automatically calculated when placing an online order, based on the weight of the goods and the delivery area.

Minimum order amount for free shipping:

We will deliver your order for free if the delivery address is located in the first delivery zone for online orders, as well as:

  • > RUB 5,000.00- for orders weighing up to 5.0 kg
  • > RUB 10,000.00- for orders weighing up to 30.0 kg

The courier service delivers small-sized orders (weighing up to 30 kg) to the buyer's door, large-sized orders to the entrance (gate, gate) of the house. Delivery includes free unloading of goods from the car and their transfer within 10 m.

Delivery date and time

Next day delivery is available if you place an order before 18:00. You will be offered a choice of one of two 7-hour delivery intervals:

  • - from 10:00 to 16:00
  • - from 15:00 to 22:00

If you want to shorten the waiting period, you can choose one of the 3-hour delivery intervals for an additional fee:

  • - from 10:00 to 13:00 +350.00 ₽.
  • - from 13:00 to 16:00 +300.00 ₽.
  • - from 16:00 to 19:00 +300.00 ₽.
  • - from 19:00 to 22:00 +350.00 ₽.

Transferring the date and changing the time interval of delivery is possible no later than 24 hours before the previously agreed date and time.

More information about the terms of the courier service can be found in the section

Universal glue Moment Crystal has become simply indispensable in everyday life. It allows fast bonding different materials– from ceramics to rubber. Its main advantage is the almost complete invisibility of traces from the connection of parts. The composition of the adhesive is of high quality, it has excellent characteristics.

Moment - universal glue, transparent, its composition is waterproof. With it, you can reliably and permanently glue different materials.

The crystal qualitatively connects wood, metal, porcelain, rubber and other surfaces. The joint is provided with high strength. Glue can also be used for fabrics, because it does not leave marks and stains, does not deform the processed material.

Glue is available in a metal tube with a volume of 30 ml or 125 ml.

The crystal does not change its parameters even under the influence of high humidity or temperature changes. Because of this, it is in great demand, has a large number of positive feedback from experienced builders and from those who prefer to do all the work on their own.

Glue has a complex chemical composition, to create it, apply Newest technologies. The main components are:

  • polymers from the group of polyurethanes;
  • ethyl acetate;
  • acetone;
  • stabilizers.

Stabilizers increase resistance to moisture. As it solidifies, it crystallizes, due to which the joints have high strength.

Varieties

The line of contact adhesives Moment includes the following types:

  • Moment 1 is universal - suitable for most materials;
  • Moment Crystal - colorless polyurethane composition for different materials;
  • Moment Marathon - used in most cases in the shoe industry;
  • Moment Gel - glue with a gel texture;
  • Rubber moment - suitable for connecting any hard or foam rubber;
  • Moment 88 - characterized by increased strength.

Each species is sold in tubes of 30 ml and 125 ml. These compounds help to make a truly reliable connection of various materials.

Specifications

The moment is characterized by the following properties:

  • transparency in liquid form and after solidification;
  • resistance to environmental factors due to the basis of polyurethane;
  • during the crystallization of the seam, the degree of adhesion of the two surfaces improves;
  • water resistance - can be used for rubber shoes and boats;
  • resistance to dilute acids and alkalis;
  • frost resistance - withstands temperatures up to minus 40 degrees;
  • good tolerance to high temperatures up to 70 degrees;
  • the temperature range for work is 18 - 25 degrees;
  • warm, dry air accelerates crystallization, and cold solvents evaporate slowly.

There are 2 main limitations to the application:

  • it is forbidden to use it for dishes;
  • it is forbidden to use for the repair of polypropylene, polyethylene and teflon products.

Instructions for use

The instructions for working with Moment are as follows:

  • To connect the surfaces, they are first thoroughly dried and cleaned with fine-grained sandpaper.
  • After stripping, the surface is degreased with gasoline or acetone, then applied in an even layer.
  • The composition covers both surfaces. Leave them outdoors for 15 minutes. A film should appear on the surface. Before connecting, you need to touch it with your fingers - if it does not stretch and does not stick, then you can connect. If the materials absorb well, then the composition must be applied a second time.
  • Firmly press the parts and hold for a few seconds. The effectiveness of the operation depends on the applied efforts. After 7 seconds, the position cannot be corrected.
  • It is important to press from the center to the edges so that air cannot accumulate in the central part, worsening grip.

Use of adhesive
  • You can use the repaired product after a day.
  • As a result, with the help of the Crystal, a high-strength compound is obtained that is resistant to wear, negative effects high temperature, solutions of acids and alkalis and moisture.

According to reviews, the Crystal is reliable and durable. The quality of the resulting seam corresponds to that declared by the manufacturer.

During operation, it is important to remember that it is highly flammable. All operations with it are carried out away from sources of fire, only in a room with good ventilation.

It is also recommended to carry out work in overalls to comply with safety precautions. If the Crystal has got on the open surface of the skin, it provokes burning, irritation, local allergic reaction.

During operation, it is necessary to remove excess, random stains. You can wipe them off in the following ways:

  • you can clean the tools with gasoline;
  • gasoline also helps to remove fresh stains on clothes;
  • from fabrics, dried glue is removed only in dry cleaning, from other materials - with the help of gasoline.

The quality of the Moment Crystal corresponds to what the manufacturer claims. Each home should have such glue in order to use it in case of unforeseen circumstances and fix the thing.

In contact with

If you notice an error, select a piece of text and press Ctrl + Enter
SHARE:
Construction portal - Doors and gates.  Interior.  Sewerage.  Materials.  Furniture.  News