2015-05-05T10:00:00+03:00
Onduvilla roof lasts a long time. Unfortunately, not all Construction Materials have the same durability, and it is impossible to postpone the replacement of an unusable insulation or the repair of a sagging truss system. In such cases, it is necessary to dismantle the correct roofing.
With a good owner, everything goes into business. Many building materials are given a second life, and Onduvilla tiles are no exception. It can be laid on the roof of a garden gazebo, covered a garage, carport, or laid on a new attic.
Dismantling an onduvilla is a painstaking task. Thanks to the ring knurling, the roofing nails are firmly held by the batten, and they must be removed so that the tile sheets remain intact. There are several ways to dismantle:
The head of the nail is bitten off with powerful end cutters. After removing the sheet, the nail rod is driven into the crate;
The head of the nail is cut off with a grinder, the incision is made above the corrugation on one or both sides. After removing the sheet, the rod is recessed into the crate;
A carpenter's hammer with a nail puller is used to remove the nail. As a support, a board about 1 m long and 9 cm wide is used (the distance between the onduvilla corrugations). The thickness of the board should correspond to the height of the corrugation - 4 cm.
The dismantling of the roofing is carried out early in the morning or in cool weather. At low temperatures, the material is more rigid and less likely to be damaged.
2. Laying onduvilla is carried out according to the instructions:
The length of the eaves overhang is 5 cm. If the roof is mounted on an old crate, the eaves overhang should be reduced by 1.5-2 cm. In this case, the recessed nail rods will not interfere and the fastening will be strong;
The bituminous tile keeps within "razrazbezhku". With this method of installation, the joints of the sheets of the upper row fall on the middle of the sheets of the lower row;
Laying is carried out from the leeward side, from the bottom up;
To make the roof look voluminous, onduvilla is laid with the dark side up;
Ondulin is used to fasten the onduvilla.
In the process of dismantling shingles cracks, chips, and other damage may appear. In most cases, a simple repair allows you to completely restore the onduvilla.
1. To repair a crack, you must:
Drill a hole with a diameter of 2-3 mm at its end and thereby prevent further growth;
Seal the crack with Onduband Pro mounting tape of the appropriate color.
2. Onduvilla waste patches are used to repair chips and large holes. Patches are installed on bituminous sealant and fastened with Ondulin nails.
Ondulin sheet - is a wavy bituminous sheet. This is quite a budget and very practical material, which is used as a roofing. Its main advantages are that it is durable and easy to install. In appearance, it can be confused with an asbestos-cement sheet, but ondulin weighs significantly less.
Ondulin is widely used as a roofing material. Sheets are produced from the most modern raw materials. The structure contains fibers of cardboard and cellulose, as well as polymeric canvases, which are impregnated with improved high quality bitumen.
The top layer of this sheet is covered with resin, which will help protect the sheet from damage of any kind and direct sunlight. Additionally, the sheet is impregnated with a special mineral pigment, which sets one or another color or shade for the slate.
Everywhere, ondulin sheets are used to restore an old roof, laying an updated roof. Sometimes builders use ondulin sheets as wall cladding for houses, protecting them from negative atmospheric phenomena. Their use is allowed for roofs with a slope of up to ninety degrees. Thus, the material can be considered universal.
Ondulin sheet is a material that is used to cover roofs. Due to its wavy shape, it resembles slate. But that's where their similarity ends. Bitumen has a significant superiority over slate. What exactly is discussed below:
In modern conditions, bitumen sheets are offered for sale by foreign manufacturers and factories operating in the domestic market. The most popular is the Ondulin brand, and the name of bitumen sheets has long been associated with it.
Slate from this manufacturer is easy to find in hundreds of countries around the world. Of course, the material of other manufacturers is also not too far behind, but it is inferior in quality:
What are the main characteristics should be inherent in the roofing material? Mainly:
In addition, not the last parameter are external characteristics. Therefore, when choosing a material for a roof, be sure to look at appearance sheets.
The most popular and high quality sheets produced by Ondulin. There are several varieties of ondulin, each of which will be discussed in more detail.
These are corrugated sheets that are used in any field of construction. Ondulin sheets are endowed with a "smart" system, which provides complete isolation from water. Ondulin Smart have a specialized lock that does not allow moisture to seep into the overlap points. The end overlap is reduced to twelve centimeters. Cost per square meter- from 242 rubles.
Ondulin Smart sheets are laid in a short period of time and does not require any special skills. On each of the sheets, points are marked where nails need to be hammered. Therefore, the use of specialized tools is also not necessary.
Equipping the roof with Ondulin Smart sheets, you save your own time. In the process, there are no problems with the placement of sheets. And you don't need to do any markings.
These sheets have eight bends, not a dozen. Ondulin DIY sheets are distinguished by practicality, excellent resistance to loads, and due to this - a long service life. This Ondulin is the narrowest.
Its weight is reduced to five kilograms. Wavy sheets are an order of magnitude narrower, therefore, in which case, they can be safely transported in a car. These sheets are easy to install, therefore they do not even require outside help in work. The abbreviation DIY sounds completely in English as: Do It Yourself, and in translation means - a call to do the work yourself.
The cost of an Ondulin DIY sheet is 250 rubles. per square meter. They are ideal for renovating an outdated roof or laying a completely new roof due to their flexibility, strength and water resistance.
This tile looks quite natural. Its production is carried out in accordance with established standards. The cost of one sheet of Ondulin is from 264 rubles. per square meter. That allows for a very modest budget to provide yourself with a beautiful high-quality coating and protection from the weather.
Ondulin tiles are definitely beneficial. The corrugated sheets are divided into "scales" of tiles with the help of special shadow stripes. They create the visual effect of natural tiles, but are much cheaper.
Also, the advantage of Ondulin tiles is color fastness, sound insulation during rain, corrosion resistance, and the presence of a warranty period. And yes, installation is pretty easy.
You can also buy Ondulin brand products in a special online store. Be wary of materials on the construction market. Beware of falsification, require a certificate from the manufacturer.
Real ondulin is rough to the touch, does not leave traces of dye on the hands, and the weight of the sheet does not exceed 6 kilograms.
You can accurately determine the number of sheets if you know the following parameters:
If you do not want to overspending building materials, a rigorous calculation is required. It is made by experienced professionals. They are able to determine the required number of component parts with maximum accuracy.
Detailed installation and fastening instructions for Ondulin - roofing fibrous sheets are in the section. We briefly summarize the main points.
Video instruction tips for installation work must-see:
These basic, quite simple rules will help you install the roof yourself.
If you are interested in Ondulin sheets to last for a really long time, without creating problems with sudden breakdowns, we recommend that you purchase material exclusively from official representatives. By the way, they will assist with the calculation of the required number of sheets and select all the necessary equipment.
Ondulin corrugated sheet is an excellent material that combines the demanded attractiveness, reliability and durability. If you're looking for quality roofing, these are the best for you!
Wavy sheets Ondulin are so easy to install that laying can be done on their own without resorting to the help of specialists. In addition, they have a relatively small weight, and also have special marks so that it is clear where to hammer nails. It's also easy to match the seams.
All types of Ondulin sheets are distinguished by external beauty and originality. Thanks to them, your house will immediately catch the eye, in comparison with neighboring buildings.
Like any product, ondulin, in addition to the obvious advantages, has its drawbacks. Unfortunately, there are no ideal things in the world. We list the main disadvantages:
1. Material burns. However, there is no danger of spontaneous combustion.
2. Beautiful color will fade over time. After 20 years, the color will fade. At the same time, the waterproofing properties of ondulin will remain at the same level. What's more, you can paint the roof any color you like. acrylic paint water based.
3. Weak wear resistance. There was a judgment that ondulin does not have high strength. This is partly true, but by observing the ondulin laying technology, you will protect yourself from such problems. In fact, the technology allows you to load 1 m2 of roofing material up to 960 kg.
4. Rough surface does not allow snow to roll. The debatable question is which is better, the constant need to remove fallen snow or calmly wait for spring when it melts. Leave it to your discretion and look forward to your feedback in the comments.
