font size
UNIFIED TARIFF - QUALIFICATION DIRECTORY OF WORKS AND PROFESSIONS OF WORKERS - ISSUE 2 - PART 2 - SECTIONS MECHANICAL PROCESSING ... Relevant in 2018
4th category
Characteristics of works. High-quality painting of surfaces with dry powders, various paints and varnishes in several shades and surface finishing with sanding, varnishing and polishing. Trimming and flashing of painted surfaces. Stretching panels with shading. Drawing drawings on surfaces using stencils in four or more tones. Cutting surfaces for a complex pattern of various types of wood, marble and stone. Self-compilation of complex colors. Restoration of painted surfaces, lincrusta, linoleum and other materials. Lacquer coatings for glass and ceramic enamel. Production of complex stencils and combs for cutting painted surfaces. Sticking carpet linoleum, pavinol and other materials. Painting after priming surfaces by cold airless spraying. Coloring of parts, products, devices in tropical design. Interoperational protection with phosphating primers of sheet material and shaped rolled products for ship tanks of drinking, distilled and feed water, medical and industrial fat. Mechanized cleaning of ship hulls from corrosion, scale, fouling and old paintwork with shot blasting machines with delivery of work on samples and standards and water under high pressure. Determining the quality of applied paintwork materials. Adjustment of mechanisms used in the production of painting works.
Shall know: the device and methods of adjustment of mechanisms and devices used in painting work; ways to perform painting work with high-quality finishes; the process of cutting surfaces for a complex pattern of various types of wood, marble and stone; features of mechanized cleaning of surfaces and hulls from fouling and old paintwork; specifications and requirements for staining and varnishing; methods of restoration of painted surfaces, linkrust, linoleum and other materials.
Work examples
1. Passenger cars, except for the brands ZIL, "Chaika", and buses - final painting, finishing and polishing.
2. Waterlines and depression marks - painting with synthetic and oil paints.
3. Details for export and exhibition exhibits - painting according to the 1st class of finishing.
4. Special marine products (3s-95, UPV) - painting according to the 1st class of finish.
5. Boats - coloring.
6. Cases, base brackets, cast parts of complex configuration - painting according to the 2nd class of finish.
7. Bearing housings for export - painting according to the 1st - 2nd class of finish.
8. Cases of devices and blocks, covers, panels, front frames, brackets, antennas - painting according to the 1st - 2nd class of finishing, external decorative painting.
9. Vessel hull, ship structures and surfaces of ship premises (compartments, tanks, tanks) - priming and painting by cold air and airless spraying of paints and varnishes.
10. Fairings - painting.
11. Decks in residential and service premises of ships - linoleum, relin, egelite flooring.
12. Surfaces of structures - application of "Adem" mastic using the "Plast" apparatus.
13. Surfaces of metal closed, tight and hard-to-reach places(mines, compartments, tanks) - priming and painting with epoxy paints.
14. Linen surfaces of aircraft cabins - multi-layer coating with varnishes and paints.
15. Coating "LAK" - measurement of special parameters.
16. Residential, office premises - leveling deck surfaces with mastics for sticking linoleum.
17. Stators and rotors - coating of inner and outer diameters, windings with insulating enamels, varnishes.
18. Walls, shelves, interior and exterior furniture, ceilings and roofs of locomotives, all-metal wagons, machine-cooled wagons, insulated wagons with a metal body and ship cabins - painting and varnishing with a brush, spray or roller.
19. Vessels, fuselages, aircraft wings and walls of tourist and service cars - application of distinctive inscriptions and markings.
20. Trolleybuses and subway cars - final painting and finishing.
21. Drinking tanks - staining.
22. Electrical appliances, large-sized electric machines - painting and polishing.
Section "Metal plating and painting"
§43. Painter
3rd category
Characteristics of works. Painting surfaces requiring a high-quality finish after applying putties and primers with paints and varnishes in several tones, sanding and polishing them. Cutting surfaces for a simple pattern of various types of wood, marble and stone. Application of drawings and inscriptions on stencils in two or three tones; numbers and letters without stencils. Painting parts and surfaces on electrostatic installations and electrostatic paint sprayers. Spray surface finish. Surface treatment with corrosion inhibitors. Regulation of air and paint supply to sprayers. Coating of products with bitumen-based varnishes and nitro-varnishes. Manual cleaning of closed volumes (cylinders, compartments). Painting and cleaning (sanding) of ships at the docks. Interoperational protection with phosphating primers of sheet material and shaped rolled products for ship structures, except for tanks of drinking, distilled and feed water, medical and industrial fat. Application of paint and varnish coatings at the location of the variable waterline of ships, the finishing of which is not subject to high requirements. Making simple stencils. Cooking adhesives according to a given recipe. Making mixtures from oil paints and varnishes, nitro-paints, nitro-varnishes and synthetic enamels. Selection of color according to given samples. Change and sticking of linoleum, relin and other materials. Adjustment of mechanisms and devices used in the production of painting works.
Must know: the principle of operation and ways of adjusting the mechanisms and devices used in painting work; arrangement of electrostatic field installations and electrostatic paint sprayers, rules for their regulation according to indications of instrumentation; rules for the protection of sheet material and profiled products for ship structures; methods of staining and varnishing products from various materials and the process of preparing products for finishing; the process of cutting surfaces for a simple pattern of various types of wood, marble and stone; properties of decorative and insulating varnishes and enamels and recipes for their composition; methods of composing paints of various colors and tones; chemical composition colors and rules for the selection of colors; methods and methods of gluing, changing linoleum, linkrust and other materials; specifications for finishing and drying products.
Work examples
1. Passenger cars, except for the ZIL and Chaika brands, and buses - applying a primer layer, puttying, sanding, primary and re-painting of the body.
2. Trucks - final painting.
3. Fittings and ship equipment - painting according to the 2nd class of finishing.
4. Barges - coloring.
5. Blocks of regulation - priming and puttying of external surfaces.
6. Block sections, complex foundations, sides inside - mechanized rust removal.
7. Doors, frames - puttying.
8. Vane propellers - priming and painting.
9. Cast and welded parts for electric machines and devices - grinding after puttying and painting.
10. Tanks - varnishing of the inner surface.
11. Contactors ZS-T - painting of the outer surface.
12. Film and camera cassettes - coloring.
13. Welded frames of large-block stations and control panels - painting.
14. Upper and lower propeller housings - priming and painting of external and internal surfaces.
15. Steel gearbox housings and covers - priming and painting of internal surfaces.
16. Cases, tables and disks of adjusting and test benches - grinding and painting with enamel.
17. Vessel hull inside and outside, superstructures - painting.
18. Turbine housings - priming, puttying and painting of external and internal surfaces.
19. Cases of electrical distribution devices - puttying, priming, painting.
20. Cranes, bridges, power transmission towers - painting.
21. Bodies of freight cars, boilers of tanks and steam locomotives, universal containers - painting.
22. Steel oil pipelines - painting of internal surfaces.
23. Machines, machine tools, devices, devices and other equipment - coloring.
24. Ship mechanisms, devices - puttying, painting by hand and mechanized way.
25. Flexible, steel supports - priming and puttying of external surfaces.
26. Decks - applying mastics.
27. Metal and wooden panels for radio devices - painting and finishing.
28. Switches "S" PS-1 steel - priming the outer surface and painting.
29. Facing and shaped tiles - facing of vertical surfaces.
30. Surfaces of ships, wagons - gluing linoleum, linkrust, relin.
31. Surfaces of ship spaces, panels, layouts - sanding on putty and primer, painting with enamels and varnishes.
32. Surfaces of structures and products - painting with installations of the URTs-1 type.
33. Surfaces of structures - application of "Adem" mastic by hand.
34. Ship surfaces, metal, wooden, for insulation in enclosed spaces, the ship's hull from the outside with rubber and fiberglass, complex foundations, shafts, rudders - manual and mechanical painting.
35. Coating "LAK" - gluing and removing stencils.
36. Frames, doors, transoms - painting and varnishing.
37. Welded steel rotors - priming and painting of internal surfaces.
38. Glasses, bushings, seals, small-sized brackets, housings, casings, frames - continuous puttying, grinding, painting according to the 2nd and 3rd class of finish.
Job Description. Painting parts in well-adjusted drums, automatic machines, by dipping and with a brush without putty and primer. Cleaning of painted surfaces from scale, corrosion, paintwork, dust and other deposits by hand with brushes and scrapers. Washing parts with alkalis, water and solvents. Preparation of surfaces for painting. Surface degreasing, varnishing and priming. Grinding of paints and varnishes on manual paint grinders. Filtration of paints and varnishes. Cooking and preparing glue. Drying of painted products. Washing and cleaning of used tools, brushes, stencils, containers, parts of paint sprayers, airless sprayers, hoses. Receiving and towing on workplace paintwork materials. Hanging parts, products on special devices and removing them after painting. Preparation of paints, varnishes, mastics, fillers, primers and putties under the guidance of a highly qualified painter.
Must know: techniques for painting parts in drums, automatic machines and by dipping; rules for preparing surfaces for painting; requirements for the surface to be cleaned; about corrosion, scale, protection wooden surfaces from woodworms and ways to protect against them; name and types of paints, varnishes, enamels, primers, putties, compositions of putty materials; rules for servicing drying chambers and cabinets and drying modes for products; methods of grinding paints by hand; purpose and conditions for the use of painting tools; compositions and methods for washing and cleaning the tools used, brushes of various types, containers and paint sprayers.
Work examples
1. Fittings, insulators - coated with asphalt varnish.
2. Tanks - staining.
3. Tags from solid materials - degreasing, applying a primer layer.
4. Workbenches, racks, cabinets for tools - applying a primer layer.
5. Forks - staining.
6. Details of machines of a simple configuration - painting.
7. Details of a simple configuration (plugs, brackets, boards, strips, etc.), frames, casings - cleaning, degreasing, applying a primer layer.
8. Ship parts (shelves, knees, etc.) and mechanisms - cleaning from contamination, washing before priming, degreasing.
9. Cast parts, brackets, housings, bases - degreasing, applying a primer layer.
10. Fences, lattices, gates, protections - coloring.
11. Insulating frames (coils) - cleaning, degreasing, applying a primer layer.
12. Wrenches, socket and special wrenches, pliers, wire cutters and other tools - staining.
13. Rings and blades of rotors - painting.
14. Coamings, casings, floorings, a set of hull parts, shaft sleeves, pipes, foundations - degreasing.
15. Metal and wooden structures - cleaning, degreasing, applying a primer layer.
16. Steel structures - cleaning from corrosion, oil stains.
17. Cases of mechanisms, partitions, bulkheads, knees, brackets, etc. - cleaning from corrosion, scale and old paintwork.
18. Vessel's hull, superstructures, bulkheads, enclosures, hull sheets, sides outside - degreasing.
19. Vessel's hull - cleaning from fuel oil during docking.
20. Covers and terminal boxes of electric motors - priming.
21. Packaging materials - impregnation with drying oil.
22. Decks - wiping with solar oil.
23. Transformer plates - varnishing in the drum.
24. Frames, bearing shields and safety welded structures, iron and steel castings for electric machines - surface cleaning and priming.
25. Different containers - coloring.
26. Old thermal insulation in ship spaces - removal.
27. Plywood, laths, decking and other products - drying oil coating.
28. Anchor chains - painting with coal lacquer by dipping.
29. Shields, bearing caps, fan guide shields and motor housings - priming and painting.
30. Protective screens - cleaning, degreasing, applying a primer layer.
31. Instrument boxes (metal and non-metal) packaging - cleaning, degreasing, applying a primer layer.
Job Description. Painting surfaces that do not require a high-quality finish after applying fillers, primers and sanding them with various abrasives. Preparation of products for varnishing on lacquer putty and for cutting various types of wood, stone and marble for drawing. Leveling surfaces with putty with repairing defects. Applying numbers, letters and drawings on stencils in one tone. Painting parts and products with a spray gun. Sanding on dry and wet wooden surfaces after puttying. Cleaning of painted surfaces from corrosion, scale, fouling and old paintwork with hand-held power tools and portable shot blast guns. Drawing up and rubbing paints, varnishes, mastics, fillers, primers and putties on paint-grinding machines according to a given recipe.
Must know: arrangement of paint machines; purpose and conditions for the use of mechanisms, devices and tools used in painting work; methods of performing paint and varnish coatings of parts and products from various materials; grinding methods; grinding materials used for different kinds paints and varnishes, and their physical properties; recipes for the preparation of paints, varnishes, mastics, putties and putties; methods of mixing paints according to a given recipe to obtain the necessary color and determine the quality of the paints and varnishes used; storage rules for solvents, paints, varnishes and enamels; drying mode of paint and varnish coatings; features of cleaning surfaces made of reinforced concrete and fiberglass.
2. Fittings and electrical parts, reinforced insulators arresters - priming and painting.
3. Ballast - surface preparation and painting.
4. Balloons - staining.
5. Blocks of pumps, injectors - priming of external surfaces.
6. Block sections, cylinders, sides inside, foundations, tanks, compartments, closed volumes - degreasing.
7. Sides, bulkheads, bottoms, decks, sections - priming.
8. Rotor shaft - priming and painting of the outer and inner surfaces.
9. Vibrators, vibration transducers, emitters - cleaning, degreasing, priming.
10. Waveguides and waveguide sections made of brass and copper - continuous puttying, grinding and painting.
11. Side and thrust steel bushings - priming and painting of external and internal surfaces.
12. Bushings, radiator and reduction gears - coated with mastic.
13. Parts and components of machines, ships and equipment - priming and painting.
14. Clamps, locks, bolts, caps assembled steel - priming and painting of external surfaces.
15. Safety valves, oil valves, blade seat covers, filter covers, frames, brackets - painting of internal surfaces.
16. Equalizing collectors, steel casings - priming of external surfaces.
17. Cases of air conditioners, filters, outer bearings, blade nests, steel ejectors - priming, painting.
18. Metal and non-metal instrument housings - cleaning, degreasing, priming, puttying, painting.
19. Brackets, sectors, steering gear housings, transformers - painting.
20. Life buoys - puttying and painting.
21. Steel thrust bearing caps - priming and painting of external surfaces.
22. Covers, boards, plates - spray painting.
23. Gland covers, glands, brackets - cleaning, degreasing, priming.
24. Roofs, frames, bogies, brake parts, floor boards, battery and fire boxes, locomotive and wagon deflectors - painting.
25. Hulls of metal vessels for auxiliary purposes - painting.
26. Hulls of wooden, reinforced concrete and fiberglass ships that do not require high-quality finishing - surface cleaning.
27. Metal beds - staining.
28. Columns, trusses, crane beams, forms for reinforced concrete products - painting.
29. Winches - priming and painting of external surfaces.
30. Sheets of the magnetic core - coating with electrical insulating varnishes and adhesives.
31. Frontal parts of stators and rotors, asynchronous machines and windings of the magnetic system of synchronous electric machines - painting.
32. Hatches, holds, foundations - pouring with cement mortar.
33. Oil coolers - priming and painting the outer surface.
34. Steel and cast iron flywheels, clamps, shanks - priming and painting surfaces.
35. Mining machines, equipment and machine tools - painting after repair, applying stenciled inscriptions.
36. Floorings, knees, casings, superstructures, bulkheads, brackets, light partitions - rust removal.
37. Supports, complete rims and stops - priming and painting of external surfaces.
38. Equipment (scaffolding, columns, beds) - rust removal, priming.
39. Panels, cases, casings - staining several times with a spray gun.
40. Plexiglas strips - painting according to 3 - 4 grades of finishing.
41. Converters, hydraulic boosters - degreasing, priming and painting by manual and mechanical means.
42. Staples, cases, slats, frames, casings, cast parts of a simple configuration - isolation of threaded and mounting holes, grinding after priming, painting by mechanized method according to the 3rd class of finish.
43. Glasses, bushings, seals, housings, casings, frames, brackets - local puttying, grinding, painting.
44. Tractors, rollers, asphalt mixers - body painting.
45. Pipes - gluing with cloth, puttying.
46. Pipes of different diameters - staining.
47. Ventilation pipes - insulation with mastic materials.
48. Steel rods - priming and painting of external surfaces.
49. Filters - degreasing, priming, puttying, manual and mechanized painting.
50. Water and oil filters - priming the outer surfaces of the AG-100 with aluminum powder.
51. Mounting tires - coloring.
52. Tires, bus ducts - puttying.
53. Organic glass scales - insulation and coloring.
54. Scales, limbs - staining.
55. Boats - puttying and painting.
56. Sheet piles and ridges of freight car plating - priming.
57. Pins assembled with a chain, washers, spindles assembled, keys with a chain assembled - priming of external and internal surfaces and painting.
58. Expanzite, foam plastic and other materials - puttying, grinding and priming.
59. Electric motors, turbogenerators - priming, puttying, painting.
60. Metal post boxes - cleaning, priming and painting.
61. Boxes and cases of devices - drawing a stencil.
Job Description. Painting surfaces requiring a high-quality finish after applying putties and primers with paints and varnishes in several tones, sanding and polishing them. Cutting surfaces for a simple pattern of various types of wood, marble and stone. Application of drawings and inscriptions on stencils in two or three tones; numbers and letters without stencils. Painting parts and surfaces on electrostatic installations and electrostatic paint sprayers. Spray surface finish. Surface treatment with corrosion inhibitors. Regulation of air and paint supply to sprayers. Coating of products with bitumen-based varnishes and nitro-varnishes. Manual cleaning of closed volumes (cylinders, compartments). Painting and cleaning (sanding) of ships at the docks. Interoperational protection with phosphating primers of sheet material and shaped rolled products for ship structures, except for tanks of drinking, distilled and feed water, medical and industrial fat. Application of paint and varnish coatings at the location of the variable waterline of ships, the finishing of which is not subject to high requirements. Making simple stencils. Cooking adhesives according to a given recipe. Compilation of mixtures of oil paints and varnishes, nitro-paints, nitro-varnishes and synthetic enamels. Selection of color according to given samples. Change and sticking of linoleum, relin and other materials. Adjustment of mechanisms and devices used in the production of painting works.
Must know: the principle of operation and methods of adjustment of mechanisms and devices used in painting work; arrangement of electrostatic field installations and electrostatic paint sprayers, rules for their regulation according to indications of instrumentation; rules for the protection of sheet material and profiled products for ship structures; methods of coloring and varnishing products from various materials and the process of preparing products for finishing; the process of cutting surfaces for a simple pattern of various types of wood, marble and stone; properties of decorative and insulating varnishes and enamels and recipes for their composition; methods of composing paints of various colors and tones; the chemical composition of paints and the rules for selecting colors; methods and methods of gluing, changing linoleum, linkrust and other materials; specifications for finishing and drying products.
Work examples
1. Passenger cars, except for the ZIL and Chaika brands, and buses - applying a primer layer, puttying, sanding, primary and re-painting of the body.
2. Trucks - final painting.
3. Fittings and ship equipment - painting according to the 2nd class of finishing.
4. Barges - coloring.
5. Blocks of regulation - priming and puttying of external surfaces.
6. Block sections, complex foundations, sides inside - mechanized rust removal.
7. Doors, frames - puttying.
8. Vane propellers - priming and painting.
9. Cast and welded parts for electric machines and devices - grinding after puttying and painting.
10. Tanks - varnishing of the inner surface.
11. Contactors ZS-T - painting of the outer surface.
12. Film and camera cassettes - coloring.
13. Welded frames of large-block stations and control panels - painting.
14. Upper and lower propeller housings - priming and painting of external and internal surfaces.
15. Steel gearbox housings and covers - priming and painting of internal surfaces.
16. Cases, tables and disks of adjusting and test benches - grinding and painting with enamel.
17. Vessel hull inside and outside, superstructures - painting.
18. Turbine housings - priming, puttying and painting of external and internal surfaces.
19. Cases of electrical distribution devices - puttying, priming, painting.
20. Cranes, bridges, power transmission towers - painting.
21. Bodies of freight cars, boilers of tanks and steam locomotives, universal containers - painting.
22. Steel oil pipelines - painting of internal surfaces.
23. Machines, machine tools, devices, devices and other equipment - coloring.
24. Ship mechanisms, devices - puttying, painting by hand and mechanized way.
25. Flexible, steel supports - priming and puttying of external surfaces.
26. Decks - applying mastics.
27. Metal and wooden panels for radio devices - painting and finishing.
28. Switches "S" PS-1 steel - priming the outer surface and painting.
29. Facing and shaped tiles - facing of vertical surfaces.
30. Surfaces of ships, wagons - gluing linoleum, linkrust, relin.
31. Surfaces of ship spaces, panels, layouts - sanding on putty and primer, painting with enamels and varnishes.
32. Surfaces of structures and products - painting with installations of the URTs-1 type.
33. Surfaces of structures - application of "Adem" mastic by hand.
34. Ship surfaces, metal, wooden, for insulation in enclosed spaces, the ship's hull from the outside with rubber and fiberglass, complex foundations, shafts, rudders - manual and mechanical painting.
35. Coating "LAK" - gluing and removing stencils.
36. Frames, doors, transoms - painting and varnishing.
37. Welded steel rotors - priming and painting of internal surfaces.
38. Glasses, bushings, seals, small-sized brackets, housings, casings, frames - continuous puttying, grinding, painting according to the 2nd and 3rd class of finish.
39. Counting, sewing and typewriters - dyeing and polishing.
40. Pillars, shields - cutting for a simple drawing of various types of wood.
41. Walls, shelves, furniture outside and inside, ceilings and roofs of locomotives and all-metal cars, cars with machine cooling and isothermal cars with a metal body - grinding, applying a revealing layer with a brush, spray or roller.
42. Reinforced concrete ships - painting.
43. Trolleybuses and subway cars - gluing panels and ceiling, interior with cotton fabric, gluing panels with linkrust, sanding on solid putty, applying the second and third layers of enamel with a brush and paint sprayer.
44. Pipes and metal fittings of locomotives and wagons - painting.
45. Ventilation pipes - painting.
46. Cargo holds - painting on fiberglass with EP enamels.
47. Steel rods - priming and painting of external surfaces.
48. CPC with devices - priming and painting the outer surface.
49. Cases of electrical equipment - varnishing and polishing.
50. Anchor chains - staining.
51. Tanks, compartments, closed volumes - manual cleaning of rust and loose scale, priming and painting.
52. Metal scales - knurling with a roller, pouring engraving in several colors.
53. Electric motors, turbogenerators - final painting.
54. Drawers and cabinets, metal panels of stations and control panels - sanding, painting and finishing.
Job Description. High-quality painting of surfaces with dry powders, various paints and varnishes in several shades and surface finishing with sanding, varnishing and polishing. Trimming and flashing of painted surfaces. Stretching panels with shading. Drawing drawings on surfaces using stencils in four or more tones. Cutting surfaces for a complex pattern of various types of wood, marble and stone. Self-compilation of complex colors. Restoration of painted surfaces, lincrusta, linoleum and other materials. Lacquer coatings for glass and ceramic enamel. Production of complex stencils and combs for cutting painted surfaces. Sticking carpet linoleum, pavinol and other materials. Painting after priming surfaces by cold airless spraying. Coloring of parts, products, devices in tropical design. Interoperational protection with phosphating primers of sheet material and shaped rolled products for ship tanks of drinking, distilled and feed water, medical and industrial fat. Mechanized cleaning of ship hulls from corrosion, scale, fouling and old paintwork by shot blasting machines with delivery of work according to samples and standards and high pressure water. Determination of the quality of applied paints and varnishes. Adjustment of mechanisms used in the production of painting works.
Must know: device and methods for adjusting mechanisms and devices used in painting work; ways to perform painting work with high-quality finishes; the process of cutting surfaces for a complex pattern of various types of wood, marble and stone; features of mechanized cleaning of surfaces and hulls from fouling and old paintwork; technical conditions and requirements for coloring and varnishing; methods of restoration of painted surfaces, linkrust, linoleum and other materials.
Work examples
1. Passenger cars, except for the brands ZIL, "Chaika", and buses - final painting, finishing and polishing.
2. Waterlines and depression marks - painting with synthetic and oil paints.
3. Details for export and exhibition exhibits - painting according to the 1st class of finishing.
4. Special marine products (3s-95, UPV) - painting according to the 1st class of finish.
5. Boats - coloring.
6. Cases, base brackets, cast parts of complex configuration - painting according to the 2nd class of finish.
7. Bearing housings for export - painting according to the 1st - 2nd class of finish.
8. Cases of devices and blocks, covers, panels, front frames, brackets, antennas - painting according to the 1st - 2nd class of finishing, external decorative painting.
9. Vessel hull, ship structures and surfaces of ship premises (compartments, tanks, tanks) - priming and painting by cold air and airless spraying of paints and varnishes.
10. Fairings - painting.
11. Decks in residential and service premises of ships - linoleum, relin, egelite flooring.
12. Surfaces of structures - application of "Adem" mastic using the "Plast" apparatus.
13. Surfaces of metal closed, cramped and hard-to-reach places (mines, compartments, tanks) - priming and painting with epoxy paints.
14. Linen surfaces of aircraft cabins - multi-layer coating with varnishes and paints.
15. Coating "LAK" - measurement of special parameters.
16. Residential, office premises - leveling deck surfaces with mastics for sticking linoleum.
17. Stators and rotors - coating of inner and outer diameters, windings with insulating enamels, varnishes.
18. Walls, shelves, interior and exterior furniture, ceilings and roofs of locomotives, all-metal wagons, machine-cooled wagons, insulated wagons with a metal body and ship cabins - painting and varnishing with a brush, spray or roller.
19. Vessels, fuselages, aircraft wings and walls of tourist and service cars - application of distinctive inscriptions and markings.
20. Trolleybuses and subway cars - final painting and finishing.
21. Drinking tanks - staining.
22. Electrical appliances, large-sized electric machines - painting and polishing.
Job Description. High-quality painting of surfaces with various paints with varnishing, polishing, ornamental and artistic multi-color finishes. Cutting surfaces for valuable wood species. High-quality painting after priming by cold airless spraying. Priming, anti-corrosion coating, anti-fouling and anti-fouling, anodic and cathodic protection of ships exposed to sea water, mineral acids and alkalis. Restoration of art inscriptions.
Must know: ways to perform painting work with artistic and ornamental finishes and the method of cold airless spraying; the process of cutting surfaces for valuable wood species; formulation, physical and chemical properties of coloring materials and compositions for artistic coloring and finishing; types of complex paintings and fonts; properties and grades of pigments, solvents, oils, varnishes, silicates, resins and other materials used in painting; methods for testing varnishes and paints for durability and viscosity; specifications for final finishing products, details and surfaces; modes of drying paint and varnish coatings; requirements for the preparation of surfaces for anti-corrosion, anode and cathodic protection; protective schemes for priming and painting the underwater part of ships exposed to sea water, mineral acids and alkalis; methods of restoration of art inscriptions.
Work examples
1. Passenger cars of the ZIL, "Chaika" brands - final painting, finishing with varnishes and enamel paints.
2. Coats of arms, ornaments, complex inscriptions - artistic execution according to sketches and drawings.
3. Cases of devices for export - painting according to the 1st class of finishing.
4. Cases of instruments operated in sea water, in tropical conditions - painting.
5. Vessel hull, ship structures and surfaces of ship premises (compartments, tanks, tanks) - priming and painting by hot air and airless spraying of paints and varnishes.
6. Hull and other metal structures in the underwater part - measurements of the specific transverse resistance of the paintwork with preliminary marking of measurement points.
7. Superstructure of passenger ships - painting.
8. Panels, shields, schemes - artistic surface finishing.
9. Cabins of ships, passenger aircraft, tourist and official passenger cars- finishing on metal, wood, plastic.
Job Description. Experimental coloring and finishing of products and surfaces with the introduction of new dyes and synthetic materials. Restoration of art paintings and drawings. Decorative varnishing, surface polishing interior spaces. Painting after priming surfaces by hot airless spraying in plants. Application of antifouling thermoplastic paints with machines. Protection of antifouling paints with preservative paints according to a special scheme. Painting from drawings and sketches by hand.
Must know: methods of implementation and requirements for experimental coloring and finishing of products and surfaces; device and methods for setting up installations for hot airless spraying of paints and varnishes and devices for applying thermoplastic paints; antifouling paint schemes; methods of restoration of artistic paintings and drawings.
Work examples
1. Ship structures - application of thick-layer coatings.
2. Surfaces internal walls passenger ships, airplanes, tourist and service cars - hand-painted according to drawings and sketches.
3. Salons, lobbies, "Lux" cabins of passenger ships, airplanes, carriages and pleasure yachts - artistic decoration, protective coating.
4. Exhibits of exhibition machines, devices and devices - multi-layer and multi-color staining, varnishing, grinding and polishing.
Qualifications
Complete general secondary education and vocational education without work experience requirements or complete general secondary education and vocational training at work. Advanced training and work experience in the profession of a painter of the 2nd category - at least 1 year.
Knows and applies: the principle of operation and methods of adjustment of mechanisms and devices that are used during painting work; the structure of electrostatic installations of the field and electrostatic paint sprayers, the rules for their regulation according to the readings of instrumentation; rules for the protection of sheet material and profiled products for ship structures; methods of painting and varnishing products from various materials and the process of preparing products for processing; the process of painting surfaces under a simple pattern of various types of wood, marble and stone; properties of decorative and insulating varnishes and enamels, recipes for their manufacture; methods of preparing paints of different colors; the chemical composition of paints and the rules for selecting colors; specifications for the processing and drying of products.
Description of work, tasks and job responsibilities
It paints surfaces that require high-quality processing, after applying putties and primers with paints and varnishes in several tones, performs grinding, priming, oiling and polishing them with various tools. Carries out painting of surfaces under simple drawing of various breeds of a tree, a marble and a stone. Apply drawings and inscriptions on stencils in two to three tones; numbers and letters without stencils. Paints parts and surfaces with electrostatic machines and electrostatic paint sprayers. Treats surfaces by spraying. Treats surfaces with corrosion inhibitors. Regulates the supply of air and paint to the spray guns. Covers products with bitumen-based varnishes and nitro-varnishes. Cleans closed volumes (cylinders, compartments). Paints and cleans (scrapes) ships at the docks. Performs interoperational protection with phosphate primers of sheet material and shaped rolled products for ship structures, except for tanks of drinking distilled and technical water, medical and technical fat. Deals paint coatings to the locations of the variable waterline of ships, for the processing of which high requirements are not imposed. Produces simple stencils. Prepares mixtures of oil paints and varnishes, nitro-paints, nitro-varnishes and synthetic enamels. Selects the color according to the given samples. Sets up mechanisms and devices that are used during painting work.
Work examples
Trucks - final painting. Cars and buses - applying a primer layer, puttying, polishing, primary and secondary painting of the body. Barges - painting. Cast and welded parts for electric machines and devices - grinding after puttying and painting. Electric motors, electric machines, turbogenerators - final painting. Tanks - varnishing of the inner surface. Welded cassettes for large-block stations and control panels - painting. Movie cassettes - and cameras - painting. Vessel hull inside and outside - painting. Cases, tables and discs of control and test benches - polished and painted with enamel. Cranes, bridges, power line supports - painting. Bodies of freight cars, boilers of tanks and locomotives, universal containers - painting. Counting, sewing and typewriters - painting and polishing. Anchor chains - painting. Machines, machine tools, devices, devices and other equipment - painting. Decks - applying mastics. Metal and wooden panels for radio devices - painting and processing. Frames, doors, transoms - painting and varnishing. Ceilings - cleaning, smoothing, etching. Walls, floors and other surfaces - simple painting. Walls, shelves, interior and exterior furniture, ceilings and roofs of locomotives and all-metal wagons, machine-cooled wagons and isometric wagons with a metal body - sanding, applying a revealing layer with a brush, spray or roller. Poles, shields - painting under a simple pattern of various types of wood. Reinforced concrete ships - painting. Trolleybuses and subway cars - sanding on solid putty, applying the second and third layers of enamel with a brush and paint sprayer. Ventilation pipes - painting. Pipes and metal fittings of locomotives and wagons - painting. Electrical equipment cases - varnishing and polishing.
Active Edition from 17.04.2009
| Document name | "SINGLE TARIFF AND QUALIFICATION DIRECTORY OF WORKS AND PROFESSIONS OF WORKERS. ISSUE 1. SECTION: PROFESSIONS OF WORKERS COMMON TO ALL SECTORS OF THE NATIONAL ECONOMY" (approved by the Decree of the State Committee for Labor of the USSR, the Secretariat of the All-Union Central Council of Trade Unions of 31.01.85 N 31 / 3-30) (ed. from 04/17/2009) |
| Type of document | decree, list |
| Host body | All-Union Central Council of Trade Unions, State Labor Committee of the USSR |
| Document Number | 31/3-30 |
| Acceptance date | 01.01.1970 |
| Revision date | 17.04.2009 |
| Date of registration in the Ministry of Justice | 01.01.1970 |
| Status | valid |
| Publication |
|
| Navigator | Notes |
"SINGLE TARIFF AND QUALIFICATION DIRECTORY OF WORKS AND PROFESSIONS OF WORKERS. ISSUE 1. SECTION: PROFESSIONS OF WORKERS COMMON TO ALL SECTORS OF THE NATIONAL ECONOMY" (approved by the Decree of the State Committee for Labor of the USSR, the Secretariat of the All-Union Central Council of Trade Unions of 31.01.85 N 31 / 3-30) (ed. from 04/17/2009)
§ 167a. Painter
(As amended by the Decree of the USSR State Committee for Labor dated 12/18/90 N 451)
1st category
Characteristics of works. Painting parts in well-adjusted drums, automatic machines by dipping and brushing without puttying and priming. Washing parts with alkalis, water and solvents. Surface degreasing. Coating with drying oil and priming. Grinding of paints and varnishes on manual paint grinders. Filtration of paints and varnishes. Drying of painted products. Washing and cleaning of used tools, brushes, stencils, containers, parts of paint sprayers, airless sprayers, hoses. Receipt and bringing to the workplace of paints and varnishes. Hanging parts, products on special devices and removing them after painting. Drawing up paints, varnishes, mastics, putties, primers, putties according to a given recipe under the guidance of a painter of a higher qualification.
Should know: techniques for painting parts in drums, automatic machines and by dipping; general information about corrosion, scale, protection of wooden surfaces from woodworms and methods of protection against them; name and types of paints, varnishes, enamels, primers, putties, compositions of putty materials; rules for servicing drying chambers and cabinets and drying modes for products; methods of grinding paints by hand; purpose and conditions for the use of painting tools: compositions and methods for washing and cleaning the tools used, brushes of various types, containers and paint sprayers.
Work examples
1. Fittings, insulators - coating with asphalt varnish.
2. Tanks - staining.
3. Forks - staining.
4. Details of machines of a simple configuration - painting.
5. Fences, lattices, gates, protections - coloring.
6. Wrenches, socket and special wrenches, pliers, wire cutters and other tools - staining.
7. Rings and blades of rotors - painting.
8. Coamings, casings, floorings, a set of hull parts, shaft sleeves, pipes, foundations are simple - degreasing.
9. Decks - wiping with solar oil.
10. Transformer plates - varnishing in the drum.
11. Frames, bearing shields and safety welded structures, iron and steel castings for electric machines - cleaning and priming of surfaces.
12. Different containers - coloring.
13. Old thermal insulation in ship premises - removal.
14. Anchor chains - painting with coal lacquer by dipping.
